MAPLUS GM Powder Accelerator Hot 25g - Molybdenum MFF0142M

GM BOOST POWDER HOT AND HOT MOLYBDENUM
Packaging format
- Code MFF0142M - 25 g

- Code MFF0142 - 25 g

Compact wet and mixed artificial polished and/or frozen snow

-3° / 0°C
60 / 100%
160°C
DESCRIPTION

Fluor free accelerator powder for competitive use. To be used with compacted wet snow and artificial mixed polished and/or frozen snow, snow temperature from -3°C to 0°C. Air humidity from 60% to 100%. Hot application with a waxing iron at 160°C. It is recommended to overcoat GM BOOST powder on a GM BASE Solid or Gel base.

GM BOOST POWDER MED AND MED MOLYBDENUM
Pack size
- Code MFF0141M - 25 g

- Code MFF0141 - 25 g
For all types of snow
-9° / -2°C
50 / 90%
160°C
DESCRIPTION

Fluor free accelerator powder for competitive use. To be used for all types of snow, new and processed, artificial and natural, snow temperature from -9°C. to -2°C. Air humidity from 50% to 90%. Hot application with a waxing iron at 160°C. It is recommended to overcoat GM BOOST powder on a GM BASE Solid or Gel base. 

GM BOOST POWDER COLD AND COLD MOLYBDENUM
Packaging format
- Code MFF0140M - 25 g

- Code MFF0140 - 25 g

For all types of snow
-22° / -8°C
50 / 80%
160°C
DESCRIPTION

Fluor free accelerator powder for competitive use. To be used for all types of snow, new and processed, artificial and natural, with snow temperatures from -22°C. to -8°C. Air humidity from 50% to 80%. Hot application with a waxing iron at 160°C. It is recommended to overcoat GM BOOST powder on a GM BASE Solid or Gel base.

HOT APPLICATION WITH A WAXING IRON

1. Spread the powder product evenly on the base;
2. Melt the product by passing from tip to tail at a constant speed (about 3 cm per second) with the waxing iron at the recommended temperature of 160°;
3. Wait at least a few minutes to allow the base to cool and the product to solidify;
4. If necessary, remove excess solidified product with a well-sharpened spatula by applying gentle pressure;
5. Release the base structure using a soft brass hand brush
6. Brush the base with a manual or rotating stiff horsehair brush
7. Brush the insole with a manual or rotating soft nylon brush
8. Polish the insole with a 12 mm merino wool roller.


We recommend GM BOOST Powder over GM BASE Solid or Gel